My Tour Experiences to Punya Kshetram "Gokarna"  and Puri Jagganatha, and "Sri Yukteswara Ashram" (Karar Ashram)

God Bless me to publish my views and share my ideas to everyone.

(I bow to Ganapathi, in the form of a small kid and Sri Maha Vishnu, for bringing the Atma Linga to Gokarna) 

We tried to start the tour with very plan ahead 1 month earlier to book train tickets to Gokarna and nearest railway station "Hubli", from Hyderabad.

but the problem is that train reaches Hubli by 10:30 AM, and the bus reaches (VRL services booked thru redbus.in) much earlier than to this time, ie., 7:00AM. They took a fair of around Rs 800.00 for one person, The Bus is very convenient and reached earlier as per schedule. It was rainy season. Drizling rainfal in Hubli. Took a hotel near to last stop of VRL stop(Laventern Road) , Hotel "Swathi ", they charged around Rs 1400.00, but we feel its not worth of it. I think "Ananth Residency" looks much good than this, but anyways I am not sure as we haven't experienced there. And any auto to take to such Hotels would cost around Rs 40.00 (may be bit un-normal rates) But the auto-wala has given a good link to Taxi driver - Basava Raj (M:+91 9035513421), he is too good. He took 6.5 per KM with rs 200.00 driver bartha. 

Gokarna is around 200 kms from Hubli. I payed around 2,600.00 for up and down trip on the day(28th July 2012). I think I could have got little bit good rate than this ie., rs 6 per KM, but I readily agreed without much bargain, becoz I believe paying the money with bargain would n't get good treatment from others. Whatever the extra payment that we give is worth of getting any other humanitarian services from them (though not expecting anything from others). Fortunately few people like Basava Raj has provided such services to me :-)

I believe any place in this world has its own importance, a big reason for its existence. Every place is a created by God. We only visit sacred places or tourist spots for refreshing from our daily routine which would give more power to do our duty. People believe that, anyone suffering from difficulties like Job threat etc., visiting Gokarna would resolve this issue with the blessings of Lord Ganesha and Lord Ishwara, as the King of Demons great Ravana's plan to take away the Atma Linga got Fixed deeply into this Earth at this place.

Devotees believe that Gokarna derives its name from the legend in which Lord Shiva emerged from the ear of a cow.

Courtesy:- http://en.wikipedia.org/wiki/Mahabaleshwar_Temple,_Gokarna

Other similar url’s of this topic:

 http://www.karnatakavision.com/gokarna-temple.php

It is said that there are many hidden aashram's deep inside the  caves, where there are many God-relaized saints live-in for ages in these caves.

We also visited Om-Beach which is very nearer to this punya kshetra. It is called Om-Beach because the beach is in the shape of OM:

 

(Off-Topic, Just watch youtube video, which I came across, very intresting truth

http://youtu.be/L-sBNzuVBgs)

When Brahma, The Creator planned to start the creation of this Universe, He requested Lord Shiva to help Him in the creation, and Lord said he will come after penance, and went into deep meditation at this Om-Beach place. Brahma waited for many years, and since Lord has not returned, Brahma started the creation of this World. Learning this, Lord was very anguish and try to come out of the tiny hole which is Cow's Hear - "Govu-Karna" taking his original form. Cow has requested Lord not to come at once, which would harm Her ear, so he came as a tiny particle and saved Cow's ear (Universal Mother).
We visited the Lord afternoon, so temple people has not allowed us to touch the Lord's Atma Lingam, they said, if we had come early morninng like 7:00 AM, we might have chance to touch the Linga.
Below are the Pics of Lord Shiva's Om Beach and some of the important temples near this location.

Our Next Plight is to goto Sri Yukteswarji’s Shrine at Puri Karar Ashram who is Icon for GnanaAvtar, where we planned our child’s Aksharabyasam.

Now the problem we are facing is that, we didn’t got the Train Tickets confirmed (18048 – Amaravati Express from Vascodigama to Howrah). Alternatively we don’t have any other trains in this route. There seems to have very less connectivity from Hubli to other parts of India. We searched Bus ticket, but there’s no such facility in this route. The bottom line is to say that, no tourister would  travel from this place to Puri. I feel this is one of the Odd plan that I made in my mind. Taxi Driver demanded rs 10,000.00 till Vijayawada Via Hyderabad, and from there catching any train which is major junction to reach Bhubaneshwar, which takes very hectic journey may be around 9 to 10 hrs to reach Vijaywada, and from Vijayawada till Bhubaneshwar another 24 hrs plus waiting time for Train, altogether going to Bhubaneshwar has only solution is to catch this train 18048, though it takes more than 24 hours this is the shortest and easiest way to go to Puri.
We paid rs 1500 to TC as he demanded to give confirmed Bearths though we had confirmed(Reserved Tickets, at Railway department and Not Online reservation)
Finally with all odds we reached Bhubaneshwar by 6:00 PM, and puri is around 50 KMs from there. Taxi men demanded more than twice the amount ie., rs 1000, so I fixed in my mind to give only an amount of rs 600. Finally an auto-wala has agreed with this fare to me, I have no other choice to accept it.

We have taken a good hotel @2500 per day at Hotel Swimming near Light house, its bit costly but have to compromise for comforts. And the hotel mgr mohanty -9937444912

And we had plans to return to Hyderabad, but again same story of un-conformed train tickets at out Hand. This time we changed our mind to break the journey from Bhubanmeshwar to Vizag and stay for a day at vizag and visit few interior beaches like "Yarada" which is very hidden beach and back waters. We visited once long back 5 years ago and the place was awesome, where there won't be any tides, just a calm ocean. But our Father-in-law has booked a flight ticket from Bhubaneshwar to Hyderabad without knowing our break journey plan. The Journey back to Hyderabad was very peaceful and happy.

We came at just below 2 hrs back to Hyderabad and to our home, Thanks a lot to Batlapenumarthy Suryanarayana and my co-brother Janumanchi Krishna Chaitanya for making our trip very happy ending.

BTW, to my surprise I learnt that, "Yarada Beach" which once we visited was closed for public (common) people, as there is some defence colony near-by has restricted this place for their private residential area purpose. This shows Lord's invicible guidance to our trip thru my Father-in-Law.

My Next Plan is to Visit "AntarVedi" which is situated at East Godavari District, near Rally Sri Mannarayana Kshetra.

Lord Hanuman ...Chiranjeeva Chiranjeeva Sukhibava Sukhibava

Some of the excerpts of Lord Hanuman

We have heard that the soul never dies and keeps reincarnating in one form or another…but in Hindu mythology, it is believed that some beings continue to live in the same form across the ages, Lord Hanuman being one of them. 


Sri Sri Daya Mata (SRF Monk) also experienced the presence of Lord Hanuman when she visited India in 1955

Only Love

"When I grow up I will never marry; I will go to India." Prophetic words from a child.

A few learned and wise people have reported seeing him. Sage Madhavarcharya was said to have graced with Lord Hanuman’s visit in 13th Century AD. In early 1600s, Lord Hanuman apparently visit Tulsidas and inspired him to write the Hindi Ramayana. Ramadas Swami, Raghavendra Swami, Swami Ramdas and Sri Sathya Sai Baba have all been apparently granted darshan of Lord Hanuman as well.

His place of residence is said to be the Gandmadana mountain, near Rameshwaram, in India’s Tamil Nadu district.

The secret mantra of Lord Hanuman

However, there is a secret mantra which if chanted is said to make Hanuman appear before a devotee. The Mantra is: Kaaltantu Kaarecharanti Enar Marishnu, Nirmukter Kaaletwam Amarishnu

(कालतंतु कारेचरन्ति एनर मरिष्णु , निर्मुक्तेर कालेत्वम अमरिष्णु)

Two Conditions of Lord Hanuman Mantra

This Mantra is said to work only when the following two conditions are met: 

(1) The devotee should be aware of his/her soul's relationship with Lord Hanuman.

(2) It is said that within 980 meters from the place where this Mantra is chanted, there should not be any human being who does not meet condition number one. That means, either there should be no other human being in the range of 980 meters or if there are human beings in this range, they should all meet condition number one, i.e. they should all be aware of their soul's relationship with Lord Hanuman.

This secret Mantra was said to be given by Lord Hanuman himself to some tribals who were living in jungles of Piduru Mountain. Piduru (full name "Piduruthalagala") is tallest mountain of Sri Lanka.

He had also apparently visited jungles of Lanka where Ravana's brother Vibhishana was ruling. He spent many days in jungles of Lanka in memory of Lord Ram. At that time some jungle dwellers served Him.

When he was said to be returning back from there, he gave this Mantra to those jungle dwellers and said, "I am pleased with your service and dedication towards me.

"Whenever you want to see me, just chant this Mantra. I will come with the speed of light to meet you."

The chief of those tribals apparently said, "Lord, we will keep this Mantra secret but what if someone else gets this Mantra and starts misusing it?"

Lord Hanuman replied, "Do not worry. This Mantra shall not work if the person who chants it is not aware of his/her soul's relationship with me."

The tribal chief apparently asked, "Lord, You have given us the "Atman Gnan" therefore we know our soul's relationship with you. We know about our past births and we know where will our souls go after our death.

But what about our children? They will not have the "Atman Gnan". They will not know their soul's relationship with you. Therefore this Mantra shall not work for them!."

Lord Hanuman apparently said, "I promise you that I will come to stay with your community every 41 years and give the Atman Gnan to your future generations too. Till the end of time your community will be able to chant this Mantra and see me anytime."

This tribal community allegedly still lives in a jungle village of Sri Lanka. They have managed to stay disconnected from modern world till now. Nobody knew about their connection with Lord Hanuman until last year when some explorers noticed their "unusual activities".

(Probably this is mostly famous by the name Adams Peak)

They were apparently doing those "unusual activities" because Lord Hanuman was with them last year (in 2014). Only they were able to see him. For others he was invisible. Lord Hanuman apparently departed from them on 27th May 2014 after giving Atman Gnan to new members of their community. Now He will come again after 41 years i.e. in 2055. However they can chant the above Mantra and call Lord Hanuman whenever they want to have his darshan.

Apparently, the head of their community is said to also maintain a logbook in which they note down minute to minute detail of what all Lord Hanuman did while He stayed with them. They record every word spoken by Lord Hanuman and every deed done by him. Details of Lord Hanuman's recent 2014 journey are also said to be recorded in this logbook.

This logbook is now apparently in possession of a spiritual organization called Setu Asia. Setu Masters are trying to decipher this logbook in their Ashram in foothills of Piduru mountain. However their work has been very slow. In last 6 months or so they have deciphered only three chapters till now.

Thousands of devotees across the globe apparently wait for new chapters desperately because every new chapter takes them closer towards fulfilling condition number 1 of this Mantra. Once the condition is fulfilled, a devotee is said to be able to call Lord Hanuman anytime merely by chanting this Mantra.

Chapter 1 - Hanuman

The Immortal Lord Hanuman arrives: describes how Lord Hanuman was seen on top of Piduru mountain last year. Lord tells story of past birth of a child who was born from two mothers.

Chapter 2 - Hanuman

Hunting Honey with Lord Hanuman: Next day Lord Hanuman goes on a honey hunting trip with the jungle dwellers. What happens there is very thrilling.

Chapter 3 - Hanuman

Lord Hanuman in web of Time: This is most enlightening chapter. This shloka's meaning is enshrined in this chapter. For example, when we human beings think of time, we think of a clock. But when Gods think of time, they think of "strings of Time". In this mantra the word "kaal tantu kaarecharanti" means "the one who moves in web of strings of time."

Courtesy: http://www.speakingtree.in/allslides/hanuman-is-still-alive-seven-reasons-that-prove-it

Technical things I learnt

1. dos programming - for loop
http://www.jamesewelch.com/2008/05/01/how-to-write-a-dos-batch-file-to-loop-through-files/
2. Problem with Linker errors in VC++ Build:-
Error description:-
the symbol '...' is not defined error VS2005 visual studio 2005
Sol: the problem could be in .ncb file referring to old symbols hence to resolve just delete the .ncb file and rebuiild the vc++ project again.
courtesy:-
http://www.tech-archive.net/Archive/VisualStudio/microsoft.public.vstudio.general/2009-11/msg00019.html
3. Leadtools unresolved external symbol error:-
http://support.leadtools.com/CS/forums/10949/ShowPost.aspx
http://support.leadtools.com/CS/forums/15340/ShowPost.aspx
http://support.leadtools.com/CS/forums/37489/ShowPost.aspx -->added ltwvc2_u.lib, ltwvc_a.lib solved the problem
4. I created dynamic library (.dll) using C language .program  compiled(using Microsoft Visual Studio 2008)...but it shows some link
errors
1.LIBCMT.lib(crt0.obj) : error LNK2019: unresolved external symbol  _main reference**d in function ___tmainCRTStartup
It appears that the project is set to build a console application, not a  DLL. Go to Project | Properties | General | Configuration Type, make  sure it's set to Dynamic Library (.dll)

Courtesy:-http://social.msdn.microsoft.com/Forums/ar/vclanguage/thread/1e63a755-d783-41ea-b303-b3a3696d28ce

5. WHEN IS THE UpdateWindows() called?
whenever there is an initialization like a window has been intialized, so show and update it.
m_pMainWnd->ShowWindow(SW_SHOW);
m_pMainWnd->UpdateWindows();
Courtesy:- http://www.cs.sjsu.edu/faculty/pearce/mfc/chp6/chapter6.htm
6. Tell me something about InitInstance, CDocument, CFrameWnd
CSingleDocTemplate and CMultiDocTemplate are derived from the CDocTemplate class, which encapsulates three protected CRuntimeClass pointers:
class CDocTemplate : public CCmdTarget
{
public:
   virtual CDocument* CreateNewDocument();
   virtual CFrameWnd* CreateNewFrame(CDocument* pDoc,
                                          CFrameWnd* pOther);
   virtual CDocument* OpenDocumentFile(...) = 0;
   // etc.
protected:
   CRuntimeClass* m_pDocClass;
   CRuntimeClass* m_pFrameClass;
   CRuntimeClass* m_pViewClass;
};
InitInstance() creates a document template holding pointers to objects representing CTestDoc, CMainFrame, and CTestView, then adds the document template to a list of templates managed by theApp.
The following class diagram shows the relationship between these classes:

     _______________
    |  |
    |    CWinApp |
    |_______________|  ____________________
     ^   |      |
     |   |   CRuntimeClass   |
     |   |      |
     |   |___________________|
     |    ^3
     |    |
     _______|________   |
    |  |   |1
    |    CTestApp |1      * |-------------------|
    |_______________|______________>| CDocumentTemplate |
    |  InitInstance |  |      |
    |_______________|  |___________________|
          ^
          |
      _______________________  |
     |   |  |
     |    CSingleDocTemplate |--------|
     |_______________________|  |
          |
          |
          |
      _______________________  |
     |   |  |
     |    CMultiDocTemplate  |--------|
     |_______________________|  |



Although an application could have many document templates, it is more common to have one.
InitInstance() indirectly calls the OpenDocumentFile() member function of the first document template on its list:
pTemplate->OpenDocumentFile(NULL);
This function (eventually) creates the application's main frame, initial document, and initial view using the dynamic instantiation feature discussed earlier:
CDocument* pDocument = (CDocument*)m_pDocClass->CreateObject();
CFrameWnd* pFrame = (CFrameWnd*)m_pFrameClass->CreateObject();
CWnd* pView = (CWnd*) m_pNewViewClass->CreateObject();
Dynamic instantiation is used because the framework can't anticipate the types of document and views we will create until we run the App Wizard.
Applications with Multiple Document and View Types
While a multi-document application allows users to open multiple views of multiple documents, the documents are generally all instances of the same CDocument-derived class, and the views are generally all instances of the same CView-derived class. But what if an application requires multiple types of documents and views? For example, workspaces, projects, and C++ files can be viewed as three distinct types of documents users may edit in Visual C++. While Microsoft Word only allows users to edit a single type of document, users may view their documents using three different types of views: normal, outline, and page layout.
It's not too difficult to create MFC applications with multiple view and document types. The trick is to edit InitInstance() by adding the creation and installation of additional document templates.

Courtesy:- http://www.cs.sjsu.edu/faculty/pearce/mfc/chp6/chapter6.htm
  _____________________________________________________________________________
  |  Sequence | Description
  |_______________________|____________________________________________________
  |    | CMyDoc Object construct
  |    | CMyView obj Construct
  |    | View Window Created
  |    | CMyView::OnCreate called (if mapped)
  |    | CMyDoc:OnNewDoc Called
  |  Application | CMyView::OnIntialUpdate called
  |  Starts  | View object intialized
  |    | View window invalidated
  |    | CMyView::OnDraw called
  |    |
  |    |
  |    |
  |_______________________|____________________________________________________
  |  User edits data| CMyView Functions update CMyDoc data members
  |_______________________|____________________________________________________
  |   |
  |  User exits app | CMyView obj destroyed
  |    | CMyDoc Obj destroyed
  |_______________________|_____________________________________________________
Courtesy:- http://www.tenouk.com/visualcplusmfc/visualcplusmfc10.html
7. BIGGEST LESSON I LEARNT IN TOOLBAR CRASH IN VC++ IS THAT:-
Invalidate() function in OnDraw should not be there.
8. All Leadtool error codes found in LTerr.h
The Nag Msg-> "Leadtool Specialized product notice" Dialog window is hidden by following:-
http://support.leadtools.com/SupportPortal/CS/forums/17263/ShowPost.aspx

9. Visual C++ does not generate .lib file for a DLL project
http://binglongx.wordpress.com/2009/01/26/visual-c-does-not-generate-lib-file-for-a-dll-project/

10. How to create .lib & .dll from libtiff - check for the script and the filenames
a. edit nmake.opt
b. check makefile.vc
c. run nmake /f makefile.vc (in tools, port, libtiff directories)
d. comment ot pixar, jpeg,zip in tiffconf.h file
11. How to debug from VC++
a. F9 at desired location of the code
b. F5 to start the debugging
c. F10 to step by
d. F11 to step into more deep
e. Project->Properties->Debugging->Arguments+Directory etc.,
Courtesy:- Harinivas
12. Some of the Leadtools Support forum link that helped me, for eg. "RotateViewPerspective" function being not available in V17 library
Ans:
http://support.leadtools.com/SupportPortal/cs/forums/2729/ShowPost.aspx
http://www.leadtools.com/help/leadtools/v175/main/api/dllref/l_rotatebitmap.htm
http://www.leadtools.com/help/leadtools/v175/main/api/dllref/l_reversebitmap.htm

Unix Commands:-
1. tar cvf <filename>.tar <src_dir_name>
2. try - (1) | gzip > <fname.tar.gz>  (eg. tar cvf - foodir | gzip > foo.tar.gz)
3. find . -name \*.tif -exec echo {} \;
4. setenv OWL_INSTANCE /mnt/cal6pdsk02/home/eqa41194/myFiles/kum_etl_raster_testing
5. gunzip -c cr_test.tar.gz | tar xvf - (eg. gunzip -c foo.tar.gz | tar xvf - )
 ------------------------------- gzcat tiff-v3.5.1.tar.gz | tar xf -
6. find . -exec grep  'gcc'  {} +
7. zip -r <zip_to_be_created> <source dir>
8. setenv DEVTOOLS /mnt/styx/devl01/devtools
setenv  OWL_INSTANCE /owl/test/test_instance
setenv OWL_PRODUCT /owl/product/v6.4.3.0/image/sol2/
setenv MY_LD_LIBRARY_PATH $OPENWIN_HOME/lib:$OPENWIN_HOME/lib/X11:/usr/dt/lib:/usr/lib:$SW_OPT/gnu/lib:$SW_OPT/lib:$ORACLE_HOME/lib:/oracle/product/8.1.7/lib:/opt/lib:$OWL_PRODUCT/lib:.
setenv LD_LIBRARY_PATH $MY_LD_LIBRARY_PATH
9. cat -v CVS/Root
10. \cp -r ~/../eqa41194/cr_1565_analyze_image/ht/ref/logs/libs/win32/ .
11. buildall -b owlcomp.lst
12.  pstack core | more
13. stop at main.cc:3
14. \rm -rf xtiff_bad_cvs/
15. sam viewTagDetails rev1_3_28_1
16. sam viewTagDetails rev1_168_50_1
17. grep "^gggg" | cut -d' ' -f2
18. dir <file_to_search> /s /b    -- very fast dos search command line utility
19. unzip filename.ZIP
20. createNewRelease –d ~/CR_1540/co_code_May08 –V v6.3.4.0 owl
21. ~/myFiles/shfiles/removectrlm.sh -find . 0d
22. ls -d /owl/product/v6.3.4.0/ht/ref/logs/loaders/logvector/src/*.h | xargs -n 1 basename
23. find . -name \*.cfg -print
24. ls *.dll | wc -l
25. test_cdm -i 5\5\hdr\5_log_1_crv_2.cdm -d > crv_2.txt
26. Shift + F3 to change the selected test in winword from uppercase to lowercase or viceversa
27. Convert a.txt and write to e.txt.
 dos2unix -n a.txt e.txt
28. ls -p | grep -v / --->lists the files excluding the directory

Sam Commands:-
create branch:
1. sam createBranch Veekay_Analyze_Image_logs logs
2. sam createBranch Veekay_Analyze_Image_owl owl
3. createNewRelease -d ~/CR_1540/branch -V v6.1.4.0 owl
 eg. createNewRelease -d ~/LasLoader/v7.0 -V v7.0.0.0 owl
4. mv v6.1.4.0 cr_1565_analyze_image
5. edit ../ht/build/owlcomp.lst
6. /owl/branch/cr_...../ht > setbuil <path till ht, including ht>eg. /CR_1540/v6.3.6.0/ht
7. cvs checkout -r release-1-0 tc
 url: http://docs.freebsd.org/info/cvs/cvs.info.Tags.html
8.  sam viewBranches | grep 1540
9. sam check-in:-
sam ci -f ci_message -cr 1540
10. more CVS/Tag
11. gen_owl -d /mnt/cal6pdsk02/home/eqa41194/LasLoader/Refine/v6501_17Dec
 This program generates product image.
 11.a: source $HOME/.cshenv --> this command sets the lasloader bin path
12. lscv <to know list of components>
13. ls -p | grep -v / --->lists the files excluding the directory
14. cvs diff -r 1.13 1.12 OXFSchema.xsd
15. cvs log <filename> --->version history